Black egg crate stands lined up on a printer bed

How to Use Egg Crate in a Reef Tank

Quick answer

Egg crate for an aquarium is the plastic grid sold as light diffuser. Reef keepers use it as a lid to keep fish from jumping out and as a cheap material for homemade frag racks. It has real downsides: it can cut light, hide a trapped fish, and turn brittle in saltwater, so choose the type and the hole size with care.

Who Reef keepers with open-top tanks, or anyone building a cheap frag rack or shelf.
What Plastic egg crate (light diffuser grid), cut to size.
When When you need a lid, a platform or a stepped shelf and want a low-cost way to make one.
Where Over the top of an open tank, or in the water as a rack or support.
Why It is cheap and easy to cut, but the sources list trade-offs you should know first.

What egg crate is

Egg crate is a plastic grid of small square cells. In Reef Central threads, posters say hardware stores sell it in the lighting section as a light diffuser, and that the packaging may say "egg crate" on the label. It is not made for aquariums, so every use below is a hobby workaround, not a product claim.

Egg crate aquarium uses: lids and frag racks

As a lid for jumping fish

In a Reef Central thread, members describe using egg crate over an open reef tank to keep jumping fish in. They also share a warning. A diamond goby's fins caught in a hole and its head was burned by 400 watt metal halide lights. Posters say the holes should be too small for a fish to fit through. If you enlarge the holes to let more light through, keep that rule in mind.

As a DIY frag rack

Reef Builders describes a hobbyist who built frag racks from egg crate light diffuser. You cut out platforms and supports with diagonal cutters, then join the pieces with cyanoacrylate glue or zip ties. The article calls these racks cheap and easy to make.

Downsides the sources list

  • Light loss. Reef Central posters disagree. One says it cuts light considerably because it blocks light at off-center angles. Another says the loss is "not that noticeable" and suggests larger holes.
  • Coatings. Posters advise against the silver-coated type. One warns the coating can peel and fall into the tank. Another doubts a "plastic chrome" finish will last under lights and humidity.
  • Brittleness. Reef Builders says long exposure to saltwater makes egg crate brittle and prone to breaking, so a rack has a limited life.
  • Hard to clean. Reef Builders says the small cells are hard to clean and give algae a good surface to grow on.
  • Looks. Reef Builders says homemade egg crate racks are not especially attractive.
  • Reef safety is unconfirmed. The sources used here do not settle whether a given egg crate is safe for a reef tank. Check the maker's product details before you put any plastic in the water.

How to use egg crate if you decide to

  1. Pick uncoated plastic. Posters warn against silver-coated sheets because the coating can peel.
  2. Check the hole size. For a lid, holes should be too small for a fish to fit through.
  3. Cut it with diagonal cutters. This is the tool Reef Builders names for cutting platforms and supports.
  4. Join pieces with cyanoacrylate glue or zip ties. Reef Builders lists both.
  5. Inspect it over time. Because saltwater can make it brittle, look for cracks and replace any piece that is breaking.
  6. Clean the cells. Rinse and brush algae out so it does not build up in the grid.

Egg crate stands from Rhino's Reef

Rhino's Reef sells Egg Crate Stands. The product page gives size options of 1, 2, 3, 4, 5 and 6 inches, each sold on its own or as a pack of 6. It has no other description, so this guide does not say what they are made of or how they are meant to be used. Read the product page before you buy.

If you would rather not cut and glue egg crate yourself, the frag racks collection holds racks made by Rhino's Reef. The XXL Frag Rack page, for example, describes a 14.5 inch by 3.5 inch rack with a magnetic attachment system and 3D-printed, reef-safe construction.

Questions people ask

Is egg crate safe for a reef tank?

The sources do not settle it. They list problems with coatings, brittleness and cleaning. Check the maker's details for the exact sheet you buy.

Does egg crate block light?

Posters disagree. One says it cuts light considerably, another says the loss is not that noticeable. Larger holes let more light through, but holes must stay too small for a fish to fit.

What color should I buy?

The sources give only one firm tip: avoid the silver-coated type, because the coating can peel into the tank. Beyond that, posters do not agree on a color.

How do I cut egg crate?

Reef Builders says to use diagonal cutters, then join pieces with cyanoacrylate glue or zip ties.

Gear for this job

Stands and racks for your frags

Look at the Egg Crate Stands product page for the size options, or see a ready-made magnetic frag rack from Rhino's Reef.

Shop Frag Racks
Back to blog