ClearCorner clear magnetic box under blue light

How to Dip Corals Before They Go in Your Tank

Quick answer

To dip corals, mix a coral dip in a separate container of tank water, following the maker's label. Soak the coral for the time the label gives, rinse it in clean saltwater, then put it in your tank. Never add the dip to your display. Bulk Reef Supply says to dip new corals every time, whatever they look like.

Who Anyone adding a new coral or frag to a reef tank, or cutting a frag from their own coral.
What A short bath in a coral dip, meant to remove pests, lower infection risk and help cut frags heal.
When After temperature acclimation and before the coral goes in your display or a quarantine tank. Also after cutting a frag.
Where In a clean container over a bucket, away from your tanks, with clean saltwater ready for rinsing.
Why Pests can hitchhike on corals, plugs and rock. Cut frags can also get infected.

What a dip can and cannot do

Bulk Reef Supply says dips aim to remove parasites, prevent disease and lower infection risk. It also says there is no bullet-proof coral dip. Not every dip suits every coral, and weakened corals may not tolerate dips well. Some dips are harmful to mobile invertebrates such as anemones, crabs and shrimp, so dip in a container outside your display. Check the bottle for what it is made for.

What you need

  • Two containers that each hold at least one gallon
  • A small powerhead, an air pump with a stone, or a bulb syringe
  • Forceps and towels
  • Gloves and eye protection
  • Clean saltwater
  • The coral dip of your choice

Use containers that have never held soap or cleaners. Our fragging guide covers the cutting side.

How to dip corals, step by step

This is the order Bulk Reef Supply gives. Where the dip's own label says something different, follow the label.

  1. Acclimate to temperature. Float the coral bag in the tank.
  2. Protect yourself. Put on gloves and eye protection.
  3. Fill two containers. Use one gallon of tank water in each. Refill the tank with clean saltwater.
  4. Mix the dip in container one. Use the label's amount for your volume.
  5. Keep the water moving. Use a powerhead or air stone.
  6. Optional: remove the coral from its plug. Bulk Reef Supply says plugs often carry eggs and pests.
  7. Soak. Use the time the maker gives. Bulk Reef Supply says times across products run from 5 to 20 minutes. Pick off dead or dying pests by hand.
  8. Rinse in container two. Clean algae off mounts if you can.
  9. Return the coral to the tank. Then throw out both waters and clean the containers.

Never mix dips in one container. Repeat until no pests fall off into the dip water. LPS corals retract and may need more than one dip, per Bulk Reef Supply.

Examples from makers' own directions

These are examples, not recommendations. Labels change, so read your bottle. We only list directions we read on the maker's or product page.

  • Coral Rx. The maker says to shake the bottle and add the dose to one gallon (3.8 L) of aquarium saltwater: 20 ml or 4 capfuls of Coral Rx, 30 drops of Coral Rx Pro, or 10 drops of Coral Rx Industrial. Mix well, keep the water moving and agitate gently for 5 to 10 minutes. Bulk Reef Supply says never to add it to the display, to use a fresh mix for each frag and not to use it on invertebrates.
  • Seachem Reef Dip. Seachem says to mix it in a separate container with 4 L (1 US gallon) of water from the source tank: 5 to 10 mL (1 to 2 capfuls). Soak 15 to 30 minutes depending on how severe the problem is. Remove coral crabs or shrimp first, and watch for excessive sliming. It does not recommend it for clams and says it does not treat hydroids.
  • ReVive Coral Cleaner. Per a retailer listing of the maker's directions, add 4 capfuls (40 ml) to a gallon of clean saltwater and swirl the coral for a few minutes. Throw the mix out after 1 hour of use. It says it is for cleaning live coral only and is not a medication.

Notice how much the times differ: a few minutes, 5 to 10, or 15 to 30. Each dip does a different job. This is why the label wins.

Dip, then quarantine

Bulk Reef Supply says a dip works best with quarantine. It suggests a tank with a hang-on-back filter without carbon and frag racks, fully isolated from your display. Dip new corals before they go in, then quarantine for 4 to 8 weeks or longer. Check each frag every morning for bite marks, receding tissue and pests, and look again with a flashlight after lights out. If you find pests, re-dip the coral and add 4 weeks to quarantine. A second Bulk Reef Supply article lists the order as acclimate, dip, rinse, remove the base or plug, then quarantine.

No quarantine tank? Bulk Reef Supply says to use frag racks in the display to acclimate and watch new corals before you glue them down. For fresh cuts, see zoanthids (wear protection) and hammer coral, where one source says to wait 2 to 3 days after a new arrival before dipping.

Mistakes to avoid

  • Adding dip to your display tank.
  • Mixing two dips in one container.
  • Skipping the rinse.
  • Using a kitchen bowl that may hold soap.
  • Assuming one dip fixes every pest.
  • Using a dip on a weak coral without checking the label.

Questions people ask

How long do I dip a coral?

As long as the label says. Sources give 5 to 10 minutes for Coral Rx and 15 to 30 for Seachem Reef Dip. Bulk Reef Supply says 5 to 20 across products.

Do I need to dip a coral I got from a friend?

Bulk Reef Supply says to always dip new corals, regardless of how they look or where they come from.

Can I dip anemones or clams?

Many dips harm mobile invertebrates. Seachem does not recommend its dip for clams. Check the label.

Does a dip stop every pest?

No. Bulk Reef Supply says no dip is bullet-proof, and Seachem says its dip does not treat hydroids.

Gear for this job

Hold new corals while they settle

The ClearCorner page lists quarantining corals and temporarily holding frags as uses. The ClearCorner Slim page lists holding corals, mushrooms and anemones before placement. The Nexus Nano page says it suits quarantine systems and holds 5 standard frag plugs.

Shop Shroom Boxes
Back to blog